Skip to Main Content
The SHOLO mill: make pallet parts and pulp chips from low-grade hardwoodsAuthor(s): Hugh W. Reynolds; Charles J. Gatchell; Charles J. Gatchell
Source: Res. Pap. NE-180. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 16 p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: View PDF (2.06 MB)
DescriptionSHOLO (from SHOrt Log) is a new solution to the old problem of profitably converting low-grade hardwood logs into products or product parts. It does away with the traditional and often uneconomical procedure of sawing low-grade logs into standard lumber and then converting this standard lumber into product parts. Instead, the SHOLO process is used to convert low-grade logs directly into product parts. In this report we describe the SHOLO process and give a specific example of one design of a SHOLO mill.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationReynolds, Hugh W.; Gatchell, Charles J. 1970. The SHOLO mill: make pallet parts and pulp chips from low-grade hardwoods. Res. Pap. NE-180. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 16 p.
- Manufacturing Hardwood Dimension Products Directly from Logs: Potential Opportunities
- Potential Dimension Yields From Direct Processing
- Development of Grading Systems for Short-Length Lumber
XML: View XML