Skip to Main Content
The SHOLO mill: return on investment versus mill designAuthor(s): Hugh W. Reynolds; Charles J. Gatchell; Charles J. Gatchell
Source: Res. Pap. NE-187. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 46 p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: View PDF (4.55 MB)
DescriptionThe newly developed SHOLO (from SHOrt Log) process can be used to convert low-grade hardwood logs into parts for standard warehouse pallets and pulp chips. Should you build a SHOLO mill? This paper has been prepared to help you decide.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationReynolds, Hugh W.; Gatchell, Charles J. 1971. The SHOLO mill: return on investment versus mill design. Res. Pap. NE-187. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 46 p.
- Utilization of mill residues in the timber products mills of the Lakeview Working Circle.
- Log and tree sawing times for hardwood mills
- Development of regional stump-to-mill logging cost estimators
XML: View XML