Skip to Main Content
The use and market for wood in the electrometallurgical industryAuthor(s): Jeffery L. Wartluft; Jeffery L. Wartluft
Source: Res. Pap. NE-191. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 12 p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: View PDF (496.43 KB)
DescriptionWood residues, particularly large chips, play an important role in the electric smelting of certain ferro-alloys. This is a report on the characteristics and growth potential of the market for wood in the electrometallurgicaI industry, including a brief account of how wood is used in electrometallurgical processes, a discussion of the preferred form of wood used, a description of plant locations and factors affecting the market, and a look to the future.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationWartluft, Jeffery L. 1971. The use and market for wood in the electrometallurgical industry. Res. Pap. NE-191. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 12 p.
- Management of birch for other uses
- Potential for expanding small diameter timber market : assessing use of wood posts in highway applications
- Used Pallets as a Source of Pellet Fuel: Current Industry Status
XML: View XML