Skip to Main Content
Alabama's timber industry - An assessment of timber product output and use, 2003Author(s): James W. Bentley; Walter E. Cartwright
Source: Resour. Bull. SRS-107. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 45 p.
Publication Series: Resource Bulletin (RB)
Station: Southern Research Station
PDF: View PDF (2.67 MB)
DescriptionIn 2003, roundwood output from Alabama’s forests totaled 1.08 billion cubic feet. Mill byproducts generated from primary manufacturers amounted to 410 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 521 million cubic feet; saw logs ranked second at 404 million cubic feet; veneer logs were third at 107 million cubic feet. The number of primary processing plants was 178. Total receipts amounted to 1.1 billion cubic feet.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationBentley, James W.; Cartwright, Walter E. 2006. Alabama''s timber industry - An assessment of timber product output and use, 2003. Resour. Bull. SRS-107. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 45 p.
KeywordsFIA, pulpwood, residues, roundwood, saw logs, veneer logs, wood movement
- Alabama's timber industry-an assessment of timber product output and use, 2005
- Alabama's timber industry - an assessment of timber product output and use, 1999
- Alabama's Timber industry - an assessment of timber product output and use, 2007
XML: View XML