Skip to Main Content
The automatic lumber planing millAuthor(s): Peter Koch
Source: The American Society of Mechanical Engineers: 108
Publication Series: Miscellaneous Publication
PDF: View PDF (1.62 MB)
DescriptionIt is probable that a truly automatic planning operation could be devised if some of the variables commonly present in the mill-run lumber were eliminated and the remaining variables kept under close control. This paper will deal with the more general situation faced by mostl umber manufacturing plants. In other words, it will be assumed that the incoming lumber has the ordinary degree of variableness.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKoch, Peter. 1957. The automatic lumber planing mill. The American Society of Mechanical Engineers: 108
- Effects of Market Prices and Silvicultural Practices on Lumber Value of Standing Trees In Uneven-Ages Plots
- An econometric model of the hardwood lumber market
- Potential sources of variation that influence the final moisture content of kiln-dried hardwood lumber
XML: View XML