Skip to Main Content
The relation of mechanical properties of wood and nosebar pressure in the production of veneerAuthor(s): Charles W. McMillin
Source: Forest Products Journal Vol. 8(1): 23-32
Publication Series: Miscellaneous Publication
PDF: View PDF (4.21 MB)
DescriptionObservations of checking frequency, depth of check penetration, veneer thickness, and surface quality were made at 20 machining conditions. An inverse relationship between depth of check and frequency of checking was established. The effect of cutting temperature was demonstrated, and strength in compression perpendicular to the grain, tension perpendicular to the grain, and rolling shear was determined at 4 temperatures. The mechanics of veneer formation is discussed with respect to the 2 basic veneer types observed.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMcMillin, Charles W. 1958. The relation of mechanical properties of wood and nosebar pressure in the production of veneer. Forest Products Journal Vol. 8(1): 23-32
- The influence of log soaking temperature on surface quality and integrity performance of birch (Betula pendula Roth) veneer
- The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde-bonded birch plywood
- Nondestructive Testing Technique to Quantify Deterioration from Marine Borer Attack in Sitka Spruce and Western Hemlock Logs: Observations from a Pilot Test
XML: View XML