Skip to Main Content
Circular sawing experiments on a radial arm sawAuthor(s): Charles W. McMillin; J.L. Lubxin
Source: Forest Products Journal, Vol. 9(10): 361-367
Publication Series: Miscellaneous Publication
PDF: Download Publication (2.54 MB)
DescriptionSeveral years ago, the American Machine and Foundry Co. decided to conduct a comprehensive investigation in the field of cutting processes. The initial emphasis has been on circular sawing because of the product line of the company's DeWalt Division. As a nevessary antecedent to theoretical and experimental investigations, an extensive review of the literature on circular sawing was undertaken by Lubkin (1)2. Although considerable quantities of information are available on ripsawing, virtually no information was discovered on crosscut or miter sawing of wood. The later operations are important and are the principal cuts for which radial-arm saws are used.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMcMillin, Charles W.; Lubxin, J.L. 1959. Circular sawing experiments on a radial arm saw. Forest Products Journal, Vol. 9(10): 361-367
- Relative Performance of Hardwood Sawing Machines
- Analyzing Investments in Thin-Kerf Saws
- Relative Kerf and Sawing Variation Values for Some Hardwood Sawing Machines
XML: View XML