Skip to Main Content
Techniques for drying thick southern pine veneerAuthor(s): Peter Koch
Source: Forest Produts Journal 2(3): 138-139
Publication Series: Miscellaneous Publication
PDF: View PDF (1.93 MB)
DescriptionThick veneers cut from southern pine are relatively easy to dry, but they are not easy to dry free of distortion. The research reported here was undertaken to compare five drying systems. Factors evaluated included rate of water loss, degree of distortion, and the effect on strength. Effects on gluability were also briefly studied.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKoch, Peter. 1964. Techniques for drying thick southern pine veneer. Forest Produts Journal 2(3): 138-139
- Practical breeding programs for jack pine in the Lake States
- Inheritance of allozyme variants in bishop pine (Pinus muricata D.Don)
- Evaluating warp of 2 by 4s sawn from panels produced through green gluing dimension lumber from small ponderosa pine logs
XML: View XML