Skip to Main Content
Straight studs are produced from southern pine cordwoodAuthor(s): Peter Koch
Source: Forest Industried, Vol. 94(5): 44-46
Publication Series: Miscellaneous Publication
PDF: View PDF (1.57 MB)
DescriptionA Process for converting southern pine veneer cores into 8-foot 2 by 4's of SPIB Stud grade and better has been developed at the Alexandria, Louisiana, Utilization Laboratory of the Southern Forest Experiment Station. The research leading to this development suggests that a similiar process would be practical for converting 8-foot southern pine cordwood into studs-two studs from every stick.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKoch, Peter 1967. Straight studs are produced from southern pine cordwood. Forest Industried, Vol. 94(5): 44-46
- Straight studs from southern pine veneer cores and cordwood
- Soil properties and pine growth affected by site preparation after clearcutting
- Impact of initial spacing on yield per acre and wood quality of unthinned loblolly pine at age 21
XML: View XML