Skip to Main Content
Gross wood characteristics affecting properties of handsheets made from loblolly pine refiner groundwoodAuthor(s): Charles W. McMillin
Source: Tappi, Vol. 51(1): 51-56
Publication Series: Scientific Journal (JRNL)
PDF: Download Publication (1.65 MB)
DescriptionSpecific refining energy and gross wood properties accounted for as much as 90% of the total variation in strength of handsheets made from 96 pulps disk-refined from chips of varying characteristics. Burst, tear, and breaking length were increased by applying high specific refining energy and using fast-grown wood of high latewood content but of relatively low density. To maximize sheet density, only high refining energy and high proportion of latewood were required.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMcMillin, Charles W. 1968. Gross wood characteristics affecting properties of handsheets made from loblolly pine refiner groundwood. Tappi, Vol. 51(1): 51-56
- Quality of refiner groundwood pulp as related to handsheet properties and gross wood characteristics
- Wood-plastic composites using thermomechanical pulp made from oxalic acid-pretreated red pine chips
- Collection of wood quality data by X-ray densitometry: a case study with three southern pines
XML: View XML