Skip to Main Content
Fiberboards from loblolly pine refiner groundwood: effects of gross wood characteristics and board densityAuthor(s): Charles W. McMillin
Source: Forest Products Journal, Vol. 18(8): 51-59
Publication Series: Miscellaneous Publication
PDF: View PDF (2.18 MB)
DescriptionBoards for insulation and and structural uses are being manufactured in increasing quantities. The coarse fiber required for these products can be disk-refined from untreated wood chips. Since such fiber is produced in essentially one mechanical operation, continuous control is required of the raw material as well as the refining process.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMcMillin, Charles W. 1968. Fiberboards from loblolly pine refiner groundwood: effects of gross wood characteristics and board density. Forest Products Journal, Vol. 18(8): 51-59
- Wood-plastic composites using thermomechanical pulp made from oxalic acid-pretreated red pine chips
- Principles of minimum cost refining for optimum linerboard strength
- Micro and colloidal stickie pacification with precipitated calcium carbonate
XML: View XML