Skip to Main Content
Straight studs from southern pine veneer cores and cordwoodAuthor(s): Peter Koch
Source: Forest Products Journal, Vol. 18(3): 28-30
Publication Series: Miscellaneous Publication
PDF: View PDF (724 KB)
DescriptionAn economically feasible system has been developed for converting southern pine veneer cores into straight 8-foot studs (2). Prototype studs - two per core - were 100 percent SPIB stud grade and better.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKoch, Peter. 1968. Straight studs from southern pine veneer cores and cordwood. Forest Products Journal, Vol. 18(3): 28-30
- Straight studs are produced from southern pine cordwood
- Process for straightening and drying southern pine 2 by 4's in 24 hours
- Further trials of roll-feed, high-temperature dryers for 8/4 southern pine
XML: View XML