Skip to Main Content
Method for computing a roughness factor for veneer surfacesAuthor(s): Chung-Yun Hse
Source: Wood Science, Vol. 4(4): 229-232
Publication Series: Miscellaneous Publication
PDF: View PDF (589 KB)
DescriptionEquations for determining the roughness factor (ratio of true surface to apparent area) of rotary-cut veneer were derived from an assumed tracheid model. With data measured on southern pine veneers, the equations indicated that the roughness factor of latewood was near unity, whereas that of earlywood was about 2.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHse, Chung-Yun. 1972. Method for computing a roughness factor for veneer surfaces. Wood Science, Vol. 4(4): 229-232
- Method for computing a roughness factor for veneer surfaces
- The influence of log soaking temperature on surface quality and integrity performance of birch (Betula pendula Roth) veneer
- Effect of various fire retardants on surface roughness of plywood
XML: View XML