Skip to Main Content
Fiber lengths in stems and brances of small hardwoods on southern pine sitesAuthor(s): Floyd G. Manwiller
Source: Wood Science, Vol. 7(2): 130-132
Publication Series: Scientific Journal (JRNL)
PDF: Download Publication (437 KB)
DescriptionThe 22 species selected for analysis comprise over 95 percent of the hardwood volume occurring on pine sites. Ten trees 6 inches in diameter at breast height (DBH) of each species were taken from throughout that portion of the spcies' range occurring in the South. Pie-shaped wedges, removed at 48-inch intervals along the stem and each branch, were combined within each of the two wood categories for weighted samples. Stem fiber lengths varies from 0.83 mm in red maple to 1.76 mm in black tupelo; branch fiber lengths were significantly shorter, varying from 0.66 mm in red maple to 1.40 mm in black tupelo.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationManwiller, Floyd G. 1974. Fiber lengths in stems and brances of small hardwoods on southern pine sites. Wood Science, Vol. 7(2): 130-132
- Fiber lengths in stems and branches of small hardwoods on southern pine sites
- Decay in yellow-poplar, maple, black gum, and ash in the central hardwood region
- Hardwood Control by Injection With Two New Chemicals
XML: View XML