Skip to Main Content
Machine to harvest slash, brush, and thinnings for fuel and fiber - a conceptAuthor(s): Peter Koch; Dan W. McKenzie
Source: Journal of Forestry Vol. 74(12): 809-812
Publication Series: Miscellaneous Publication
PDF: View PDF (948 KB)
DescriptionIt is proposed that biomass from non-commercial thinnings, and from logging slash residual after harvest, be lhogged and recovered for fuel and fiber. Such a procedure might yield two dividends of biomass totalling as much as 90,000 kg per ha (40 tons per acre, gree weight basis) from each rotation of southern pine. For sites deficient in organic matter, it is alternatively proposed that residual biomass be hogged and returned to the forest floor-either uniformly distributed or concentrated in bands.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKoch, Peter; McKenzie, Dan W. 1976. Machine to harvest slash, brush, and thinnings for fuel and fiber - a concept. Journal of Forestry Vol. 74(12): 809-812
- Machine to harvest slash, brush, and thinnings for fuel and fiber- a concept
- Identifying aboveground wood fiber potentials in New York State
- Wood fiber supply and demand in the United States.
XML: View XML