Skip to Main Content
Density profile and fiber alignment in fiberboard from three southern hardwoodsAuthor(s): George E. Woodson
Source: Forest Products Journal, Vol. 27(8): 29-34
Publication Series: Miscellaneous Publication
PDF: View PDF (2.15 MB)
DescriptionDensity profile and fiber orientation were evaluated for their effects on selected mechanical properties of medium density fiberboard. Bending MOE and modulus of rigidity were predicted from density profiles established by x-ray radiography. Orthotropic ratios ranged from 1.19 to 2.32 for electrically aligned fiberboards from three southern hardwoods. Off-axis tensile and compressive behavior was best described by Hankinson's formula when compared with other methods. Results indicate that oriented fiberboards have mechanical properties superior to boards of equal density but with randomly placed fibers; woody raw material can be best utilized as structural panels, therfore, in boards with oriented fibers.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationWoodson, George E. 1977. Density profile and fiber alignment in fiberboard from three southern hardwoods. Forest Products Journal, Vol. 27(8): 29-34
- Density profile and fiber alignment in fiberboard from three southern hardwoods
- Relationship between Fiber Furnish and the Structural Performance of MDF
- High fiber-low matrix composites: kenaf fiber/polypropylene.
XML: View XML