Skip to Main Content
Developing a Multi Sensor Scanning System for Hardwood Inspection and ProcessingAuthor(s): Richard W. Conners; D.Earl Kline; Philip A. Araman
Source: Proceedings, 2nd International Workshop/Seminar on Scanning Technology and Image Processing on Wood. 107-118
Publication Series: Miscellaneous Publication
PDF: View PDF (659 KB)
DescriptionFor the last few years the authors as part of the Center for Automated Processing of Hardwoods have been attempting to develop a multiple sensor hardwood defect detection system. This development activity has been ongoing for approximately 6 years, a very long time in the commercial development world. This paper will report the progress that has been made and will delineate the reasons the effort has taken so long to reach this point in the development effort.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationConners, Richard W.; Kline, D.Earl; Araman, Philip A. 1995. Developing a Multi Sensor Scanning System for Hardwood Inspection and Processing. Proceedings, 2nd International Workshop/Seminar on Scanning Technology and Image Processing on Wood. 107-118
- Scanning Hardwood Lumber for Processing and Grading - What To Do Now and Why
- Response of 1- to 4-Year-Old Upland Hardwood Stands to Stocking and Site Manipulations
- Afforestation of agricultural lands in the lower Mississippi Alluvial valley: the state of our understanding
XML: View XML