Skip to Main Content
User's manual for a computer program for simulating intensively managed allowable cut.Author(s): Robert W. Sassaman; Ed Holt; Karl Bergsvik
Source: Gen. Tech. Report PNW-GTR-001. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 55 p
Publication Series: General Technical Report (GTR)
Station: Pacific Northwest Research Station
PDF: Download Publication (4.77 MB)
DescriptionDetailed operating instructions are described for SIMAC, a computerized forest simulation model which calculates the allowable cut assuming volume regulation for forests with intensively managed stands. A sample problem illustrates the required inputs and expected output. SIMAC is written in FORTRAN IV and runs on a CDC 6400 computer with a SCOPE 3.3 operating system. The conceptual basis of the SIMAC method is not discussed in detail.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSassaman, Robert W.; Holt, Ed; Bergsvik, Karl. 1972. User''s manual for a computer program for simulating intensively managed allowable cut. Gen. Tech. Report PNW-GTR-001. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 55 p
Keywordsallowable cut, programing (computer)
- Valuing a log: alternative approaches.
- Oregon's forest products industry and timber harvest 2013 with trends through 2014
- Oregon’s forest products industry and timber harvest, 2008: industry trends and impacts of the Great Recession through 2010
XML: View XML