Skip to Main Content
Effects Of Silvicultural Practice And Veneer Lay Upon Some Mechanical Properties Of Loblolly Pine PlywoodAuthor(s): Todd F. Shupe; Chung Y. Hse; George A. Grozdits; Elvin T. Choong
Source: Forest Products Journal Vol. 47, NO. 10. 6 p.
Publication Series: Miscellaneous Publication
PDF: View PDF (160 KB)
DescriptionLoblolly pine three-ply plywood was manufactured from veneer obtained from silviculturally different stands. Panels from each site were assembled with four different veneer grade arrangements and tested in wet and dry conditions. Stiffness properties in both the wet and dry conditions and strength properties in the dry condition were all significantly affected by silvicultural practice; veneer grade arrangement also showed significant differences. Shear strength and bending properties (MOR and MOE) were most favorable with panels manufactured from all A-grade veneer (AAA). Strength properties were found to be very similar between panels manufactured with A-grade veneer on one face and C-grade veneer on the other face and in the core (ACC), and A-grade veneer on both faces and C grade veneer in the core (ACA).
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationShupe, Todd F.; Hse, Chung Y.; Grozdits, George A.; Choong, Elvin T. 1997. Effects Of Silvicultural Practice And Veneer Lay Upon Some Mechanical Properties Of Loblolly Pine Plywood. Forest Products Journal Vol. 47, NO. 10. 6 p.
- Effects of silviculture practice and veneer layup on some mechanical properties of loblolly pine plywood
- An overview of silvicultural influences on loblolly pine veneer-basedpanel properties
- The internal bond and shear strength of hardwood veneered particleboard composites
XML: View XML