Skip to Main Content
Seasoning degrade in kiln drying ponderosa pine in south central Oregon.Author(s): A.C. Knauss
Source: PNW Old Series Research Notes No. 136, p. 1-11
Publication Series: Scientific Journal (JRNL)
Station: Pacific Northwest Research Station
PDF: View PDF (640 KB)
DescriptionThis report presents the results of a study to determine the loss in volume and value of lumber when kiln drying and surfacing the production from ponderosa pine logs. The study measured (1) the reduction in volume due to trimming and culling dry lumber after surfacing, (2) the reduction in grade due to seasoning defects, (3) the reduction in grade due to failure of lumber to remain on grade because of manufacturing defects, and (4) the loss in value of the lumber resulting from the degrade.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKnauss, A.C. 1957. Seasoning degrade in kiln drying ponderosa pine in south central Oregon. PNW Old Series Research Notes No. 136, p. 1-11
- Seasoning and surfacing degrade in kiln-drying ponderosa pine in eastern Washington.
- Ponderosa pine lumber recovery in Lakeview, Oregon area.
- Lumber recovery from small-diameter ponderosa pine from Flagstaff, Arizona
XML: View XML