Skip to Main Content
Western redcedar lumber recovery from a western Washington sawmill.Author(s): E.E. Matson
Source: PNW Old Series Research Notes No. 143, p. 1-10
Publication Series: Research Note (RN)
Station: Pacific Northwest Research Station
PDF: View PDF (410 KB)
DescriptionDuring the summer of 1956 a lumber-recovery study was made at E. C. Miller Lumber Company in Aberdeen, Wash. to determine the grades of lumber that can be expected from western redcedar logs. This sawmill is equipped with a 24-foot carriage, a 10-foot band headrig, a band pony headrig, and an edger. All of the upper grades of lumber are seasoned and then sent to the planing mill for further manufacture, primarily, into beveled siding. Most of the logs cut at this mill are purchased in the open market.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMatson, E.E. 1957. Western redcedar lumber recovery from a western Washington sawmill. PNW Old Series Research Notes No. 143, p. 1-10
- Western hemlock lumber recovery at a western Washington sawmill.
- White fur lumber recovery at a western Washington sawmill.
- Multivariate regression model for predicting yields of grade lumber from yellow birch sawlogs
XML: View XML