Skip to Main Content
Utilization of mill residues in the timber products mills of the Lakeview Working Circle.Author(s): A.C. Knauss
Source: PNW Old Series Research Paper No. 6: 1-17
Publication Series: Research Paper (RP)
Station: Pacific Northwest Research Station
PDF: View PDF (1.7 MB)
DescriptionThe manufacture of lumber from logs is always accompanied by the accumulation of wood fiber in the form of sawdust, slabs, edgings, trim, and shavings which is of little commercial value. Sawmills use a portion of this "residual" wood fiber for generating steam with which to run the mill and dry kilns, some is used as a raw material for other industries, but much of it is still disposed of in burners.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKnauss, A.C. 1953. Utilization of mill residues in the timber products mills of the Lakeview Working Circle. PNW Old Series Research Paper No. 6: 1-17
- Laboratory-and mill-scale study of surfactant spray flotation deinking
- Relationship between Fiber Furnish and the Structural Performance of MDF
- A strategy for prediction of the elastic properties of epoxy-cellulose nanocrystal-reinforced fiber networks
XML: View XML