Skip to Main Content
Constructing aerial photo volume tables.Author(s): Robert B. Pope
Source: USDA Forest Service PNW Old Series Research Paper No. 49: 1-25
Publication Series: Research Paper (RP)
Station: Pacific Northwest Research Station
PDF: View PDF (1.6 MB)
DescriptionAlthough most foresters are familiar with the use of aerial photo volume tables, little has been written on how to make them. Certain pitfalls in the construction process have either been ignored or only casually mentioned in the existing literature. The forester tackling his first photo volume table is likely to bypass some of the important considerations without being aware of their existence. This does not prevent the tables from being useful, but it is our belief that better tables will result if the major issues are brought out into the open where they can be faced squarely.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationPope, Robert B. 1962. Constructing aerial photo volume tables. USDA Forest Service PNW Old Series Research Paper No. 49: 1-25
- Aerial photo volume tables for Douglas-fir in the Pacific Northwest.
- Verification of aerial photo stand volume tables for southeast Alaska.
- Photo series for quantifying natural forest residues in common vegetation types of the Pacific Northwest.
XML: View XML