Skip to Main Content
Lumber recovery from Douglas-fir thinnings at a bandmill and two chipping canters.Author(s): Thomas D. Fahey; Douglas L. Hunt
Source: Res. Pap. PNW-RP-131. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 14 p
Publication Series: Research Paper (RP)
Station: Pacific Northwest Research Station
PDF: View PDF (1.5 MB)
DescriptionTrees cut in thinning of Douglas-fir stands were processed into lumber at a profiled cant chipper, a square cant chipper with resaw, and a bandmill.
Results are reported in terms of both cubic feet and Scribner long log scale. Included are tables by log input by diameter class for three studies, recovery by lumber grade and dimension item for three studies, and value and recovery by diameter class for the square and profiling canters. Recovery totals for all three studies in both lumber and chips are also reported.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationFahey, Thomas D.; Hunt, Douglas L. 1972. Lumber recovery from Douglas-fir thinnings at a bandmill and two chipping canters. Res. Pap. PNW-RP-131. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 14 p
Keywordslumber, recovery ratios, thinning (trees), sawmill equipment
- Lumber recovery of Douglas-fir from the Coast and Cascade Ranges of Oregon and Washington.
- Sitka spruce and western hemlock beach logs in southeast Alaska: suitability for lumber, pulp, and energy.
- Product recovery of ponderosa pine in Arizona and New Mexico.
XML: View XML