Skip to Main Content
Review of test methods used to determine the corrosion rate of metals in contact with treated woodAuthor(s): Samuel L. Zelinka; Douglas R. Rammer
Source: Frame building news. (Aug. 2005): pages 38-46.
Publication Series: Miscellaneous Publication
PDF: Download Publication (123 KB)
DescriptionThe purpose of this literature review is to give an overview of test methods previously used to evaluate the corrosion of metals in contact with wood. This article reviews the test methods used to evaluate the corrosion of metals in contact with wood by breaking the experiments into three groups: exposure tests, accelerated exposure tests, and electrochemical tests.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationZelinka, Samuel L.; Rammer, Douglas R. 2005. Review of test methods used to determine the corrosion rate of metals in contact with treated wood. Frame building news. (Aug. 2005): pages 38-46.
KeywordsFasteners, testing, preserved wood, corrosion, accelerated life testing, test methods
- Uncertainties in corrosion rate measurements of fasteners exposed to treated wood at 100% relative humidity
- Synthesis of published and unpublished corrosion data from long term tests of fasteners embedded in wood : calculation of corrosion rates and the effect of corrosion on lateral joint strength
- Electrochemical corrosion testing of fasteners in extracts of treated wood
XML: View XML