Skip to Main Content
Nanoindentation size effects in woodAuthor(s): Joseph E. Jakes; Donald S. Stone; Charles R. Frihart
Source: Proceedings : 30th annual meeting of the Adhesion Society, Inc. : February 18-21, 2007, Tampa Bay, FL. [S.l. : s.n.], c2007: pages 15-17.
Publication Series: Miscellaneous Publication
PDF: Download Publication (556 KB)
DescriptionThe purpose of this work was to test some of the assumptions underlying methods currently employed to investigate nanoindentation properties of wood. We examined whether hardness and modulus depend on load. We employed a surface preparation technique that minimizes alterations of cell wall properties. Areas were determined using both (a) Oliver-Pharr method and (b) a calibrated atomic force microscope (AFM).
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationJakes, Joseph E.; Stone, Donald S.; Frihart, Charles R. 2007. Nanoindentation size effects in wood. Proceedings : 30th annual meeting of the Adhesion Society, Inc. : February 18-21, 2007, Tampa Bay, FL. [S.l. : s.n.], c2007: pages 15-17.
KeywordsUrea-formaldehyde resins, testing, polyurethanes, plant cell walls, nanostructured materials, microstructure, nanotechnology, adhesion, adhesives, nanoindentation, resorcinol glues, polyvinyl acetate, melamine, durability, wood bonding, bonding, penetration
- Evaluation of adhesive penetration of wood fibre by nanoindentation and microscopy
- Characterizing polymeric methylene diphenyl diisocyanate reactions with wood. 2, Nano-indentation
- Utility of Horioka’s and Marra’s models for adhesive failure
XML: View XML