Skip to Main Content
Role of buoyancy and heat release in fire modeling, propagation, and instabilityAuthor(s): Shahid M. Mughal; Yousuff M. Hussaini; Scott L. Goodrick; Philip Cunningham
Source: In: Butler, Bret W.; Cook, Wayne, comps. The fire environment--innovations, management, and policy; conference proceedings. 26-30 March 2007; Destin, FL. Proceedings RMRS-P-46CD. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station. CD-ROM. p. 195-219
Publication Series: Proceedings (P)
Station: Rocky Mountain Research Station
PDF: View PDF (1.5 MB)
DescriptionIn an investigation of the dynamics of coupled fluid-combustion-buoyancy driven problems, an idealised model formulation is used to investigate the role of buoyancy and heat release in an evolving boundary layer, with particular emphasis on examining underlying fluid dynamics to explain observed phenomena arising in forest fire propagation. The role played by the Froude number and background ambient wind in affecting various characteristics observed in propagating fires is addressed. A simplified flow situation is modeled in which controlled amounts of volumetric heat is injected into the system. By varying the strength of the heat source and the ambient winds the study examines the impact of these variables on the flow dynamics and the consequential development of instability waves that may provide insight into environmental conditions that contribute to erratic fire behaviour. Analysis suggests that there are two routes to fire behaviour and destabilisation, with Froude number playing a crucial role in the boundary layer development and consequential instability of the convecting flow. In low Froude number situations, the mechanism of fire induced local winds may arise as a product of heat release and buoyancy, which induces favourable pressure gradients accelerating local winds to above the ambient. The analysis shows that a massive destabilisation takes place and that stationary, zero streamwise and nonzero spanwise wavenumber, viscous disturbances have the highest growth rates. These stationary spanwise vortex disturbances, commonly referred to as pure vortex longitudinal “roll cell” modes, might well be linked to cross roll features that have been identified in some recent fire related numerical simulations. The simple model shows that a key requirement in breakup of the fireline, is a low enough ambient wind. In high Froude number cases, the most probable factor is the sensitivity of the boundary layer to separate and lift off the surface; this being caused by massive updrafts of buoyant air. The relatively weak nature of instabilities in this regime suggests that the convecting fireline development would otherwise be well behaved.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMughal, Shahid M.; Hussaini, Yousuff M.; Goodrick, Scott L.; Cunningham, Philip. 2007. Role of buoyancy and heat release in fire modeling, propagation, and instability. In: Butler, Bret W.; Cook, Wayne, comps. The fire environment--innovations, management, and policy; conference proceedings. 26-30 March 2007; Destin, FL. Proceedings RMRS-P-46CD. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station. CD-ROM. p. 195-219
Keywordswildland fire management, coupled fluid-combustion-buoyancy, model formulation, buoyancy and heat release, Froude number
- Simulations of buoyancy-generated horizontal roll vortices over multiple heating lines
- Three Types of Horizontal Vortices Observed in Wildland Mass and Crown Fires
- Entrainment regimes and flame characteristics of wildland fires
XML: View XML