Skip to Main Content
Fire behavior sensor package remote trigger designAuthor(s): Dan Jimenez; Jason Forthofer; James Reardon; Bret Butler
Source: In: Butler, Bret W.; Cook, Wayne, comps. The fire environment--innovations, management, and policy; conference proceedings. 26-30 March 2007; Destin, FL. Proceedings RMRS-P-46CD. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station. CD-ROM. p. 499-505
Publication Series: Proceedings (P)
Station: Rocky Mountain Research Station
PDF: View PDF (1.3 MB)
DescriptionFire behavior characteristics (such as temperature, radiant and total heat flux, 2- and 3-dimensional velocities, and air flow) are extremely difficult to measure insitu. Although insitu sensor packages are capable of such measurements in realtime, it is also essential to acquire video documentation as a means of better understanding the fire behavior data recorded by individual fire behavior sensor packages. Therefore, coupling each sensor pack with a digital video recorder for simultaneous recording of video and insitu measurements allows viewing of the fire behavior as flames approach, envelope, and disperse past individual sensor packs. The limiting factor in this process is the amount of recordable digital video tape, typically 60 to 90 minutes of record time. This raises both tactical and safety-related concerns, requiring researchers to remain in proximity to the advancing fire in order to activate the fire behavior sensor and video packages. A new remote trigger that eliminates the need for human interaction in order to activate data collection hardware and video equipment has been designed and tested. This trigger system allows the fire behavior and video packages to stay in “sleep” mode until a measurable rise in heat flux is detected. The detection activates the fire behavior sensor package to begin logging data and sends a wireless signal to activate the video package. The setup has been tested for range and interference in open and densely treed plots as well as in fire and nonfire settings, effectively and consistently activating the equipment at distances up to 100 yards.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationJimenez, Dan; Forthofer, Jason; Reardon, James; Butler, Bret. 2007. Fire behavior sensor package remote trigger design. In: Butler, Bret W.; Cook, Wayne, comps. The fire environment--innovations, management, and policy; conference proceedings. 26-30 March 2007; Destin, FL. Proceedings RMRS-P-46CD. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station. CD-ROM. p. 499-505
Keywordswildland fire management, fire behavior, insitu sensor packages, remote trigger
- A portable system for characterizing wildland fire behavior
- A new method for wireless video monitoring of bird nests
- In-situ characterization of wildland fire behavior
XML: View XML