Skip to Main Content
South Carolina's timber industry-an assessment of timber product output and use, 2005Author(s): Tony G. Johnson; Nathan Smith
Source: Resour. Bull. SRS–121. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 28 p.
Publication Series: Resource Bulletin (RB)
Station: Southern Research Station
Download Publication (1.2 MB)
DescriptionIn 2005, industrial roundwood output from South Carolina's forests totaled 645 million cubic feet, 13 percent more than in 2003. Mill byproducts generated from primary manufacturers increased 10 percent to 186 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 318 million cubic feet; saw logs ranked second at 258 million cubic feet; veneer logs were third at 42 million cubic feet. The number of primary processing plants remained at 75 in 2005. Total receipts increased 8 percent to 582 million cubic feet.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationJohnson, Tony G.; Smith, Nathan. 2007. South Carolina''s timber industry-an assessment of timber product output and use, 2005. Resour. Bull. SRS–121. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 28 p.
KeywordsFIA, pulpwood, residues, roundwood, saw logs, veneer logs, wood movement
- Mississippi's timber industry - an assessment of timber product output and use, 2005
- Florida's timber industry--an assessment of timber product output and use, 2007
- Florida's timber industry-an assessment of timber product output and use, 2005
XML: View XML