Skip to Main Content
South Carolina's timber industry - an assessment of timber product output and use, 2007Author(s): Tony G. Johnson; Tim O. Adams
Source: Resour. Bull. SRSâ€“150. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 28 p.
Publication Series: Resource Bulletin (RB)
Station: Southern Research Station
PDF: View PDF (2.24 MB)
DescriptionIn 2007, industrial roundwood output from South Carolinaâ€™s forests totaled 613 million cubic feet, 5 percent less than in 2005. Mill byproducts generated from primary manufacturers decreased 6 percent to 176 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 304 million cubic feet; saw logs ranked second at 226 million cubic feet; composite panels were third at 39 million cubic feet. The number of primary processing plants remained at 75 in 2007. Total receipts declined 2 percent to 569 million cubic feet.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationJohnson, Tony G.; Adams, Tim O. 2009. South Carolina's timber industry—an assessment of timber product output and use, 2007. Resour. Bull. SRS–150. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 28 p.
KeywordsFIA, pulpwood, residues, roundwood, saw logs, veneer logs, wood movement
- Florida's timber industry--an assessment of timber product output and use, 2007
- Arkansas’ timber industry - an assessment of timber product output and use, 2009
- Florida’s timber industry—an assessment of timber product output and use, 2009
XML: View XML