Skip to Main Content
Alabama's Timber industry - an assessment of timber product output and use, 2007Author(s): James R. Schiller; Brian Hendricks
Source: Resour. Bull. SRSâ€“151. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 33 p.
Publication Series: Resource Bulletin (RB)
Station: Southern Research Station
PDF: View PDF (705 KB)
DescriptionIn 2007, roundwood output from Alabamaâ€™s forests totaled 1.10 billion cubic feet. Mill byproducts generated from primary manufacturers amounted to 379 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 574 million cubic feet; saw logs ranked second at 413 million cubic feet; veneer logs were third at 75 million cubic feet. The number of primary processing plants was 144. Total receipts amounted to 1.12 billion cubic feet.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSchiller, James R.; Hendricks, Brian. 2009. Alabama's Timber industry—an assessment of timber product output and use, 2007. Resour. Bull. SRS–151. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 33 p.
KeywordsFIA, pulpwood, residues, roundwood, saw logs, veneer logs, wood movement.
- Alabama's timber industry-an assessment of timber product output and use, 2005
- Alabama's timber industry - An assessment of timber product output and use, 2003
- Alabama's timber industry - an assessment of timber product output and use, 1997
XML: View XML