Skip to Main Content
Tennessee's timber industry - an assessment of timber product output and use, 2007Author(s): Rhonda M. Mathison; Doug Schnabel
Source: Resour. Bull. SRSâ€“152. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 29 p.
Publication Series: Resource Bulletin (RB)
Station: Southern Research Station
PDF: View PDF (1.44 MB)
DescriptionIn 2007, roundwood output from Tennesseeâ€™s forests was 297 million cubic feet. Mill byproducts generated from primary manufacturers totaled 114 million cubic feet. Seventy percent of the plant residues were used primarily for fuel and fiber products. Saw logs were the leading roundwood product at 166 million cubic feet; pulpwood ranked second at 117 million cubic feet; other industrial products were third at 12 million cubic feet. There were 329 primary processing plants operating in Tennessee in 2007. Total receipts amounted to 327 million cubic feet.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMathison, Rhonda M.; Schnabel, Doug. 2009. Tennessee's timber industry—an assessment of timber product output and use, 2007. Resour. Bull. SRS–152. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 29 p.
KeywordsFIA, pulpwood, residues, roundwood, saw logs, veneer logs, wood movement
- Florida’s timber industry—an assessment of timber product output and use, 2009
- Florida's timber industry--an assessment of timber product output and use, 2007
- Arkansas’ timber industry - an assessment of timber product output and use, 2009
XML: View XML