Skip to Main Content
Mississippi's timber industry--an assessment of timber product output and use, 2007Author(s): Michael Howell; Tony Johnson
Source: Resour. Bull. SRS--157. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 31 p.
Publication Series: Resource Bulletin (RB)
Station: Southern Research Station
PDF: View PDF (2.42 MB)
DescriptionIn 2007, industrial roundwood output from Mississippi’s forests totaled 894 million cubic feet, 13 percent less than in 2005. Mill byproducts generated from primary manufacturers decreased 18 percent to 316 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 401 million cubic feet; saw logs ranked second at 379 million cubic feet; veneer logs were third at 76 million cubic feet. There was a total of 84 primary processing plants in 2007, a loss of 32 since 2005. Total receipts decreased 18 percent to 746 million cubic feet.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHowell, Michael; Johnson, Tony G. 2009. Mississippi’s timber industry—an assessment of timber product output and use, 2007. Resour. Bull. SRS–157. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 31 p.
KeywordsFIA, pulpwood, residues, roundwood, saw logs, veneer logs, wood movement
- Louisiana's timber industry - an assessment of timber product output and use, 2005
- Kentucky's timber industry - an assessment of timber product output and use, 2001
- South Carolina's timber industry - an assessment of timber product output and use, 2007
XML: View XML