Partitioning of pine bark components to obtain a value-added product for plywood manufactureAuthor(s): Thomas L. Eberhardt; Karen G. Reed; Chi-Leung So
Source: Conference Proceedings Paper In: Hse, Chung-Yun; Jiang, Zehui; Kuo, Mon-Lin, eds. Advanced biomass science and technology for bio-based products: Proceedings of the meeting: 2007 May 23-25; Beijing, China. People’s Republic of China: Chinese Academy of Forestry: 302-309.
Publication Series: Miscellaneous Publication
Station: Southern Research Station
PDF: View PDF (1.37 MB)
DescriptionSouthern yellow pine (SYP) bark particles and bark extracts have been used only to a limited extent in wood-based composites due to poor performance relative to existing products and/or economic barriers. Our efforts to identify alternative applications for this biomass resource require the development of an improved understanding of the interrelationships between bark anatomy and chemistry. An intermediate level of processing, involving grinding and classification operations, was used to convert SYP bark into adhesive filler for plywood manufacture. This filler was lower in ash and extractives than another filler prepared by directly grinding the bark as received. Near-infrared spectroscopy was successfully coupled with multivariate analysis to develop a model to predict inner:outer bark ratios and thereby select preferred bark resources for this application.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationEberhardt, Thomas L.; Reed, Karen G.; So, Chi-Leung. 2009. Partitioning of pine bark components to obtain a value-added product for plywood manufacture. In: Hse, Chung-Yun; Jiang, Zehui; Kuo, Mon-Lin, eds. Advanced biomass science and technology for bio-based products: Proceedings of the meeting: 2007 May 23-25; Beijing, China. People’s Republic of China: Chinese Academy of Forestry: 302-309.
- Grinding and classification of pine bark for use as plywood adhesive filler
- Strategies for improving the performance of plywood adhesive mix fillers from southern yellow pine bark
- Bioassay of Pine Bark Extracts as Biting Stimulants for the Southern Pine Beetle
XML: View XML