Skip to Main Content
Alaska birch for edge-glued panel production—considerations for wood products manufacturersAuthor(s): David Nicholls
Source: Gen. Tech. Rep.PNW-GTR-820 Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 25 p.
Publication Series: General Technical Report (GTR)
Station: Pacific Northwest Research Station
Download Publication (1.99 MB)
DescriptionEdge-glued panels could become a natural extension for the birch (Betula papyrifera Marsh.) lumber industry in Alaska, resulting in greater utilization of the birch resource while allowing producers to explore a wider variety of products and markets. Key advantages of edge-glued panel production include the relatively low cost of equipment, the potential use of smaller diameter stems and less valuable grades of lumber, flexibility in panel product sizes, and opportunities to sell products within established local markets. This paper has reviewed practical considerations for wood products firms in Alaska who may be considering edge-glued panel production from birch lumber. Key issues could include equipment requirements, lumber drying, quality control considerations, wood machining, treatment of character mark features, marketing strategies, and strategic partnerships. Edge-glued panels represent a class of products that could be within the technical and financial reach of many Alaska producers. One immediate opportunity would be kitchen cabinet production; however, other products that utilize edge-glued panels include furniture, doors, and craft items.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationNicholls, David. 2010. Alaska birch for edge-glued panel production—considerations for wood products manufacturers. Gen. Tech. Rep.PNW-GTR-820 Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 25 p.
KeywordsAlaska, birch, lumber, edge-glued panel, economic development
- Edge-glued panels from Alaska hardwoods: retail manager perspectives
- Injection of emamectin benzoate protects paper birch from birch leafminer (Hymenoptera: Tenthredinidae) for two field seasons
- Concentrations of Ca and Mg in early stages of sapwood decay in red spruce, eastern hemlock, red maple, and paper birch
XML: View XML