Skip to Main Content
A composite cordwood volume table for pulpwood species in the Lake StatesAuthor(s): S.R. Gevorkiantz
Source: Technical Note 241. St. Paul, MN: U.S. Department of Agriculture, Forest Service, Lake States Forest Experiment Station. 1 p.
Publication Series: Technical Note
Station: Lake States Forest Experiment Station
PDF: Download Publication (71.5 KB)
DescriptionBecause there is very little difference in the stacked unpeeled volumes of most native trees cut for pulpwood in the Lake States, a generalized cordwood table can be used. Tech. Note 202 (Aug. 1943) presented a table for trees from 6 to 14 inches d.b.h. and 1 to -7 bolts in usable height. Because of the demand for similar information for both smaller and larger trees, a new table of greater range has been prepared.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationGevorkiantz, S.R. 1945. A composite cordwood volume table for pulpwood species in the Lake States. Technical Note 241. St. Paul, MN: U.S. Department of Agriculture, Forest Service, Lake States Forest Experiment Station. 1 p.
- Cubic-Foot Volume Tables for Shortleaf Pine in the Virginia-Carolina Piedmont
- Cost effectiveness of three different release treatments of table mountain pine in a severely overstocked and pure stand
- Using prescribed fire to regenerate Table Mountain pine in the Southern Appalachian Mountains
XML: View XML