Skip to Main Content
A comparison of two open source LiDAR surface classification algorithmsAuthor(s): Wade T. Tinkham; Hongyu Huang; Alistair M.S. Smith; Rupesh Shrestha; Michael J. Falkowski; Andrew T. Hudak; Timothy E. Link; Nancy F. Glenn; Danny G. Marks
Source: Remote Sensing. 3: 638-649.
Publication Series: Scientific Journal (JRNL)
Station: Rocky Mountain Research Station
View PDF (370.39 KB)
DescriptionWith the progression of LiDAR (Light Detection and Ranging) towards a mainstream resource management tool, it has become necessary to understand how best to process and analyze the data. While most ground surface identification algorithms remain proprietary and have high purchase costs; a few are openly available, free to use, and are supported by published results. Two of the latter are the multiscale curvature classification and the Boise Center Aerospace Laboratory LiDAR (BCAL) algorithms. This study investigated the accuracy of these two algorithms (and a combination of the two) to create a digital terrain model from a raw LiDAR point cloud in a semi-arid landscape. Accuracy of each algorithm was assessed via comparison with >7,000 high precision survey points stratified across six different cover types. The overall performance of both algorithms differed by only 2%; however, within specific cover types significant differences were observed in accuracy. The results highlight the accuracy of both algorithms across a variety of vegetation types, and ultimately suggest specific scenarios where one approach may outperform the other. Each algorithm produced similar results except in the ceanothus and conifer cover types where BCAL produced lower errors.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationTinkham, Wade T.; Huang, Hongyu; Smith, Alistair M.S.; Shrestha, Rupesh; Falkowski, Michael J.; Hudak, Andrew T.; Link, Timothy E.; Glenn, Nancy F.; Marks, Danny G. 2011. A comparison of two open source LiDAR surface classification algorithms. Remote Sensing. 3: 638-649.
KeywordsLiDAR, algorithm, filtering, DTM, MCC, BCAL
- The influence of conifer forest canopy cover on the accuracy of two individual tree measurement algorithms using lidar data
- Laboratory characterization of PM emissions from combustion of wildland biomass fuels
- Computer-based synthetic data to assess the tree delineation algorithm from airborne LiDAR survey
XML: View XML