Skip to Main Content
Hydraulic complexity metrics for evaluating in-stream brook trout habitatAuthor(s): J. Kozarek; W. Hession; M. ASCE; C. Dolloff; P. Diplas
Source: Journal of Hydraulic Engineering 136(12):1067-1076
Publication Series: Scientific Journal (JRNL)
Download Publication (259.1 KB)
DescriptionA two-dimensional hydraulic model (River2D) was used to investigate the significance of flow complexity on habitat preferences of brook trout (Salvelinus fontinalis) in the high-gradient Staunton River in Shenandoah National Park, Virginia. Two 100-m reaches were modeled where detailed brook trout surveys (10–30-m resolution) have been conducted annually since 1997. Spatial hydraulic complexity metrics including area-weighted circulation and kinetic energy gradients (KEG) were calculated based on modeled velocity distributions. These metrics were compared to fish density in individual habitat complexes (10–30-m subreaches) to evaluate relationships between fish location and average flow complexity. In addition, the fish density was compared to additional habitat variables including percent cascade (CS), pool (PL) and riffle, and in-stream (ISCN) and riparian cover. There were negative correlations between modeled mean velocity (VEL) and maximum depth (MAXD) and fish density; however, there were no statistically significant correlations between KEGs or area-weighted circulation and fish density. Fish density was negatively correlated to ISCN and positively correlated to the percent of the channel dominated by protruding boulders (BD) and CS. The structural complexity of cascade habitat and areas with protruding boulders creates complex flow patterns indicating that flow complexity plays an important role in brook trout habitat preferences at the local scale. Linear discriminate analysis was used to further investigate the relationships between habitat variables and fish density. Using backward stepwise variable selection, the final explanatory model contained the BD, ISCN, MAXD, PL, and VEL variables. These observations indicate that at a coarse spatial scale hydraulic complexity may be an important component in fish habitat preferences; however, other habitat variables cannot be ignored and the hydraulic complexity metrics calculated using 2D modeling results were not explanatory. While spatial hydraulic complexity metrics provide quantifiable measures for evaluating stream restoration project impacts on in-stream habitat quality, the relationships between fish density and hydraulic complexity were not straightforward. This is likely due in part to modeling limitations in this high-gradient complex stream. Further research is needed at a range of spatial scales, stream types, and fish species to fully investigate the use of hydraulic complexity metrics to quantify in-stream habitat.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationKozarek, J.L.; Hession, W.C.; ASCE M.; Dolloff, C.A.; Diplas, P.; ASCE, M. 2010. Hydraulic complexity metrics for evaluating in-stream brook trout habitat. Journal of Hydraulic Engineering 136(12):1067-1076.
KeywordsAquatick habitats, Hydraulic models, Two-dimensional models, mountatin streams, boulders
- Have brook trout (Salvelinus fontinalis) displaced bull trout (Salvelinus confluentus) along longitudinal gradients in central Idaho streams?
- Alien invasions in aquatic ecosystems: toward an understanding of brook trout invasions and potential impacts on inland cutthroat trout in western North America
- Rainbow trout versus brook trout biomass and production under varied climate regimes in small southern Appalachian streams
XML: View XML