Skip to Main Content
Disposal of logging slash, thinnings, and brush by buryingAuthor(s): Harry E Schimke; Ronald H. Dougherty
Source: Res. Note PSW-RN-111. Berkeley, CA: U.S. Department of Agriculture, Forest Service, Pacific Southwest Forest and Range Experiment Station. 4 p
Publication Series: Research Note (RN)
Station: Pacific Southwest Research Station
PDF: View PDF (1.62 MB)
DescriptionA feasibility study was conducted on the Stanislaus National Forest to find out if logging slash, thinnings, and brush could be disposed of by burying. This method of slash disposal shows promise and has some distinct advantages over disposal by chipping and burning.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSchimke, Harry E; Dougherty, Ronald H. 1966. Disposal of logging slash, thinnings, and brush by burying. Res. Note PSW-RN-111. Berkeley, CA: U.S. Department of Agriculture, Forest Service, Pacific Southwest Forest and Range Experiment Station. 4 p
- The effect of asphalt and wax emulsions on moisture changes in slash.
- Chipping of thinning slash on fuel-breaks
- Do petroleum-based protective coatings add fuel value to slash
XML: View XML