Skip to Main Content
Crown and tree weights of madrone, black oak, and tanoakAuthor(s): William E. Sundahl
Source: Res. Note PSW-RN-101. Berkeley, CA: U.S. Department of Agriculture, Forest Service, Pacific Southwest Forest and Range Experiment Station. 4 p
Publication Series: Research Note (RN)
Station: Pacific Southwest Research Station
PDF: View PDF (835.62 KB)
DescriptionPreliminary curves for estimating crown and tree weight are given for madrone, black oak, and tanoak. These curves complement previously published slash weight tables for westside Sierra Nevada mixed conifers. Tanoak crowns in trees 12 to 20 inches d.b.h. were two to three times heavier than black oak and madrone crowns.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSundahl, William E. 1966. Crown and tree weights of madrone, black oak, and tanoak. Res. Note PSW-RN-101. Berkeley, CA: U.S. Department of Agriculture, Forest Service, Pacific Southwest Forest and Range Experiment Station. 4 p
- Preliminary crown weight estimates for tanoak, black oak, and Pacific madrone.
- Local volume tables for Pacific madrone, tanoak, and California black oak in north-central California
- Control of sprouting of tanoak and madone stumps
XML: View XML