Skip to Main Content
Installation, care, and maintenance of wood shake and shingle sidingAuthor(s): Jack Dwyer; Tony Bonura; Arnie Nebelsick; Sam Williams; Christopher G. Hunt
Source: General technical report FPL-GTR-202. Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2011: 13 p.
Publication Series: General Technical Report (GTR)
Station: Forest Products Laboratory
View PDF (1.49 MB)
DescriptionThis article gives general guidelines for selection, installation, finishing, and maintenance of wood shakes and shingles. The authors gathered information from a variety of sources: research publications on wood finishing, technical data sheets from paint manufacturers, installation instructions for shake and shingle siding, and interviews with experts having experience constructing and inspecting shake and shingle siding. If research reports could not be found, the recommendations are based on opinions of experts and practices that have been shown to give good service life for shakes and shingles. More detailed information is available from shake and shingle suppliers, paint manufacturers, and the Cedar Shake and Shingle Bureau (CSSB).
CitationDwyer, Jack; Bonura, Tony; Nebelsick, Arnie; Williams, Sam; Hunt, Christopher G. 2011. Installation, care, and maintenance of wood shake and shingle siding. General Technical Report FPL-GTR-202. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 13 p.
KeywordsShakes, shingles, ultraviolet radiation, UV degradation, water-repellent preservatives, semitransparent stains, solid-color stains, paints, siding, stains, installation, wood preservatives, preservatives, building construction, maintenance, degradation, deterioration, building materials
- Installation, care, and maintenance of wood shake and shingle roofs
- Solid-Color Stains on Western Redcedar and Redwood Siding
- Service life of finishes on smooth-planed and saw-textured western redcedar bevel siding
XML: View XML