Skip to Main Content
Shear strength of surface-mine spoils measured by triaxial and direct shear methodsAuthor(s): Michael J. Superfesky; George P. Williams
Source: Gen. Tech. Rep. NE-39. Upper Darby, PA: U. S. Department of Agriculture, Forest Service, Northeastern Forest Experimental Station. 15 p.
Publication Series: General Technical Report (GTR)
Station: Northeastern Research Station
PDF: View PDF (1.46 MB)
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSuperfesky, Michael J.; Williams, George P. 1978. Shear strength of surface-mine spoils measured by triaxial and direct shear methods. Gen. Tech. Rep. NE-39. Upper Darby, PA: U. S. Department of Agriculture, Forest Service, Northeastern Forest Experimental Station. 15 p.
- Effects of shear coupling on shear properties of wood
- Design of thin shear blades for crosscut shearing of wood.
- Effect of tree roots on a shear zone: modeling reinforced shear stress.
XML: View XML