Skip to Main Content
Unit area control in California forestsAuthor(s): William E. Hallin
Source: Res. Note 77. Berkeley, CA: U.S. Department of Agriculture, Forest Service, California Forest and Range Experiment Station. 9 p
Publication Series: Forest Research Note
PDF: View PDF (1.44 MB)
DescriptionThere is a definite distinction between the basic concept of unit area control and the specific techniques or treatments used for specific units. Unit area control as a term was first used in connection with a cutting trial in the sugar pine-fir type; consequently, many foresters think the term refers merely to the technique used in sugar pine management, This is not the case, Applying silviculture unit areas is appropriate and desirable for other major types as well. So far, however, techniques have been developed only for pine and mixed-conifer types in the Sierra Nevada. The remainder of this discussion is concerned with these types.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHallin, William E. 1951. Unit area control in California forests. Res. Note 77. Berkeley, CA: U.S. Department of Agriculture, Forest Service, California Forest and Range Experiment Station. 9 p.
- Site preparation as an aid to sugar pine regeneration
- Slash disposal and site preparation in converting old-growth sugar pine-fir forests to regulated stands
- Genetic variation in height and white pine blister rust resistance in sugar pine (Pinus lambertiana) - 15-year field trial results of three six-parent half dialers from three breeding zones
XML: View XML