Skip to Main Content
Cone Calorimeter Analysis of FRT Intumescent and Untreated Foam Core ParticleboardsAuthor(s): Mark A. Dietenberger; Ali Shalbafan; Johannes Welling; Charles Boardman
Source: North American Thermas Analysis Society, North American Thermal Society Conference , August 12-15, 2012 Buena Vista Palace Hotel & spa Orlando, Florida from CD paper 203. 2012.
Publication Series: Proceedings - Paper (PR-P)
Station: Forest Products Laboratory
PDF: Download Publication (860.39 KB)
DescriptionThe effectiveness of treatments of the surface layer of novel foam core particleboards were evaluated by means of Cone calorimeter tests. Foam core particleboards with variations of surface layer treatment, adhesives and surface layer thicknesses under similar processing conditions were used to produce the test specimen for the Cone calorimeter tests. Ignitability, heat release rate profile, peak of heat release rate, total heat released, effective heat of combustion, mass loss rate, gaseous emissions and specific extinction area were measured using the cone irradiance of 50 kW/m2.Additional analysis of this data provided fuel composition information that could reveal the pyrolysis events of the composite boards. Thermocouples at various depths were used to provide further verification of pyrolysis events. The unprotected foam core panels generally had much higher heat release rates, somewhat higher heat of combustion and much higher smoke production due to the EPS-foam component of tested panels, whereas time to ignition and total heat release were not pronounced from the veneer treated boards. Adding the commercial FRT veneer to the face particleboard provided a dramatic improvement to the measured flammability properties. It worked sufficiently well with a 3 mm thick surface layer to improve the predicted flame spread rating of the foam core particleboards.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationDietenberger, Mark A.; Shalbafan, Ali; Welling, Johannes; Boardman, Charles. 2012. Cone calorimeter analysis of FRT intumescent and untreated foam core particleboards. NATAS, North American Thermas Analysis Society, Technical program of the 40th North American Thermal Society Conference, 2012 August 12-15, Buena Vista Palace Hotel & Spa Orlando, FL. CD paper 203.
KeywordsCone Calorimeter, FRT, Particleboards
- Treated and Untreated foam core particleboards with intumescent veneer
- Foam Core Particleboards with Intumescent FRT Veneer: Cone Calorimeter Testing With Varying Adhesives, Surface Layer Thicknesses, and Processing Conditions
- Cone calorimeter testing of foam core sandwich panels treated with intumescent paper underneath the veneer (FRV)
XML: View XML