Skip to Main Content
Development and applications of the LANDFIRE forest structure layersAuthor(s): Chris Toney; Birgit Peterson; Don Long; Russ Parsons; Greg Cohn
Source: In: Morin, Randall S.; Liknes, Greg C., comps. Moving from status to trends: Forest Inventory and Analysis (FIA) symposium 2012; 2012 December 4-6; Baltimore, MD. Gen. Tech. Rep. NRS-P-105. Newtown Square, PA: U.S. Department of Agriculture, Forest Service, Northern Research Station. [CD-ROM]: 305-309.
Publication Series: Paper (invited, offered, keynote)
Station: Northern Research Station
PDF: Download Publication (889.96 KB)
DescriptionThe LANDFIRE program is developing 2010 maps of vegetation and wildland fuel attributes for the United States at 30-meter resolution. Currently available vegetation layers include ca. 2001 and 2008 forest canopy cover and canopy height derived from Landsat and Forest Inventory and Analysis (FIA) plot measurements. The LANDFIRE canopy cover layer for the conterminous United States is the first of its kind developed with FIA tree measurements as the source of ground reference data. The mapping process is based on regression tree models with FIA plot values as the dependent variables (canopy cover, canopy height), using predictor variables derived from reflectance, terrain, and a Shuttle Radar Topography Mission-based height metric. Base vegetation maps are updated beginning with a set of annual disturbance maps that combine extant fire severity mapping with Landsat time-series disturbance and polygon data describing management activities on Federal and state lands. FIA plot data are used in the Forest Vegetation Simulator to model disturbance effects on forest vegetation for each disturbance type and severity class. Updated 2010 products are scheduled for delivery during early 2013. The 2010 products include a new tree list layer in which stand structure is depicted explicitly by approximating a representative list of trees occurring at each 30-m pixel. The tree list layer provides a more detailed characterization of canopy fuel structure than is available with standard LANDFIRE products, facilitating new applications and research in fire behavior and fire effects simulation.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationToney, Chris; Peterson, Birgit; Long, Don; Parsons, Russ; Cohn, Greg. 2012. Development and applications of the LANDFIRE forest structure layers. In: Morin, Randall S.; Liknes, Greg C., comps. Moving from status to trends: Forest Inventory and Analysis (FIA) symposium 2012; 2012 December 4-6; Baltimore, MD. Gen. Tech. Rep. NRS-P-105. Newtown Square, PA: U.S. Department of Agriculture, Forest Service, Northern Research Station. [CD-ROM]: 305-309.
Keywordsstatistics, estimation, sampling, modeling, remote sensing, forest health, data integrity, environmental monitoring, cover estimation, international forest monitoring
- Spatial fuel data products of the LANDFIRE Project
- Mapping aspen in the Interior West
- Monitoring landscape change for LANDFIRE using multi-temporal satellite imagery and ancillary data
XML: View XML