Skip to Main Content
Effects of slash, machine passes, and soil moisture on penetration resistance in a cut-to-length harvestingAuthor(s): Han-Sup Han; Debbie Page-Dumroese; Sang-Kyun Han; Joanne Tirocke
Source: International Journal of Forest Engineering. 17(2): 11-17.
Publication Series: Scientific Journal (JRNL)
Station: Rocky Mountain Research Station
PDF: Download Publication (176.43 KB)
DescriptionMultiple entries into forest stands are often needed for fire hazard reduction and ecosystem restoration treatments in the Inland-Northwest U.S.A. region. However, soil compaction occurring from mechanized harvesting operations often remains for many years and may contribute to a decline in long-term site productivity. A controlled experiment on a silt loam soil was conducted to determine (a) the effectiveness of logging slash to buffer compaction, (b) the influence of the number of machine passes, and (c) the contribution of soil moisture to changes in penetration resistance during a cut-to-length harvest in northern Idaho. Penetration resistance was measured at three soil depths (10, 20, and 30 cm) for three different moisture contents (low, medium, and high) and slash amounts (none, light, and heavy) after each of 12 machine passes (one pass each with a harvester and an empty forwarder, and 10 passes with a fully-loaded forwarder). At all three soil depths the main effect of moisture content and machine passes on penetration resistance was significant, but slash amounts alone did not significantly affect penetration resistance. After 12 passes, we measured the greatest penetration resistance in the medium soil moisture treatment at 5 to15 cm of soil depth. When evaluated at similar moisture contents after harvesting, the soil that was driest during machine traffic (low moisture treatment) had the lowest penetration resistance. Slash was important for protecting the soil against compaction in the medium and high soil moisture treatments. Penetration resistance did not significantly increase after the second pass of a fullyloaded forwarder (31,752 kg) at any moisture content or slash level. Managing felling operations to take advantage of dry soil conditions or using slash when soils are moist may help reduce ruts and avoid long-term compaction impacts on this soil type.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHan, Han-Sup; Page-Dumroese, Debbie; Han, Sang-Kyun; Tirocke, Joanne. 2006. Effects of slash, machine passes, and soil moisture on penetration resistance in a cut-to-length harvesting. International Journal of Forest Engineering. 17(2): 11-17.
Keywordssoil compaction, site productivity, soil disturbance, mechanized harvesting
- Soil Compaction Absent in Plantation Thinning
- Effect of slash on forwarder soil compaction
- Effects of Machine Traffic on the Physical Properties of Ash-Cap Soils
XML: View XML