Skip to Main Content
Potential Dimension Yields From Direct ProcessingAuthor(s): Wenjie Lin; D. Earl Kline; Philip A. Araman
Source: Hardwood Forestry Bulletin. 457: 1,4.
Publication Series: Miscellaneous Publication
PDF: Download Publication (156 KB)
DescriptionAs the price of timber increases and environmental leigslation limits harvestable log volumes, the process of converting logs directly into dimension parts needs further exploration. Direct processing converts logs directly into rough green dimension parts without the intermediate steps of lumber manufacturing, grading, trading, shipping and drying. A major attraction of direct processing is that it can produce high-value dimension products from lower-grade logs.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationLin, Wenjie; Kline, D. Earl; Araman, Philip A. 1994. Potential Dimension Yields From Direct Processing. Hardwood Forestry Bulletin. 457: 1,4.
- Manufacturing Hardwood Dimension Products Directly from Logs: Potential Opportunities
- Producing Hardwood Dimension Parts Directly From Logs: An Economic Feasibility Study
- Dimension Yields from Factory Grade 2 and 3 Red Oak Logs
XML: View XML