Skip to Main Content
U.S. Forest Service
Caring for the land and serving people

United States Department of Agriculture

Home > Search > Publication Information

  1. Share via EmailShare on FacebookShare on LinkedInShare on Twitter
    Dislike this pubLike this pub

    Description

    Nondestructive evaluation of cellulose nanofibril (CNF) films was performed using cantilever beam vibration (CBV) and acoustic methods to measure dynamic modulus. Static modulus was tested using tensile tension method. Correlation analysis shows the data measured by CBV has little linear relationship with static modulus, possessing a correlation coefficient (R2) of 0.282. However, the data tested by acoustic method correlated well with the static modulus, approaching a correlation coefficient of 0.6. Irregular sample shape largely contributed to these obtained results. The dynamic modulus, especially measured by acoustic method, is likely an effective tool in non-destructive evaluation of mechanical properties for CNF nanomaterials.

    Publication Notes

    • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

    Citation

    Qing, Yan; Ross, Robert J.; Cai, Zhiyong; Wu, Yiqiang. 2013. Nondestructive measurement of dynamic modulus for cellulose nanofibril films. In: USDA Forest Service, Forest Products Laboratory, General Technical Report, FPL-GTR-226. pp. 278-286.

    Keywords

    Cellulose nanofibril films, cantilever beam vibration, Acoustic method, tensile test

    Related Search


    XML: View XML
Show More
Show Fewer
Jump to Top of Page
https://www.fs.usda.gov/treesearch/pubs/45114