Skip to Main Content
Lignin-based Phenol-Formaldehyde Resins from Purified CO2 Precipitated Kraft lignin (PCO2KL)Author(s): Yao Chen; Charles R. Frihart; Zhiyong Cai; Linda F. Lorenz; Nicole M. Stark
Source: In: International Conference on Wood Adhesives, October 9-11, 2013 Toronto, Ontario Canada from CD ISBN: 978-0-935018-37-0; 2013; pp. 601-610.
Publication Series: Full Proceedings
Station: Forest Products Laboratory
PDF: View PDF (0 B)
DescriptionTo investigate the potential for using purified CO2-precipitated Kraft lignin (PCO2KL) with phenol-formaldehyde (PF) for application as an adhesive in plywood production, two lignin replacement procedures were examined to assess lignin’s effect on bond quality. Methylolation and oxidation with hydrogen peroxide (H2O2) were carried out to try to increase lignin reactivity. The first procedure involved substitution of 30% of the PF resin solids in the adhesive mix with a solution of methylolated lignin with or without prior oxidation; the second replacement procedure involved direct condensation of lignin or oxidized lignin to replace 25% of phenol. Formulated adhesives were compared to a control phenol-formaldehyde (PF) adhesive prepared in the laboratory. The physical properties (solid content, viscosity and pH values) of formulated resins were determined. PCO2KL-based adhesives showed comparatively good plywood shear strengths. However, they had lower wood failures than those of test samples made from PF resin only.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationChen, Yao; Frihart, Charles R.; Cai, Zhiyong; Lorenz, Linda F.; Stark, Nicole M. 2013. Lignin-based Phenol-Formaldehyde Resins from Purified CO2 Precipitated Kraft lignin (PCO2KL). In: International Conference on Wood Adhesives, October 9-11, 2013 Toronto, Ontario Canada from CD ISBN: 978-0-935018-37-0; 2013; pp. 601-610.
KeywordsKraft lignin, lignin-phenol-formaldehyde resin, hydrogen peroxide, methylolation, physical properties, shear strength, wood failure
- Lignin-based Phenol-Formalehyde Resins from Purified CO2 Precipitated Kraft Lignin (PCO2KL)
- Phenol-formaldehyde reactivity with lignin in the wood cell wall
- Alkali-treated kraft lignin as a component in flakeboard eesins
XML: View XML