Skip to Main Content
Diffraction-limited IR Microspectroscopy with IRENIAuthor(s): J. Sedlmair; B. Illman; M. Unger; C. Hirschmugl
Source: Microsc. Microanal. 18 (Suppl 2), 2012; pp. 840-841.
Publication Series: Scientific Journal (JRNL)
Station: Forest Products Laboratory
Download Publication (920.68 KB)
DescriptionIn a unique way, IRENI (Infrared environmental Imaging), operated at the Synchrotron Radiation Center in Madison, combines IR spectroscopy and IR imaging, revealing the chemical morphology of a sample. Most storage ring based IR confocal microscopes have to overcome a trade-off between spatial resolution versus signal-to-noise ratio (SNR). For IRENI, this problem has been addressed by introducing a beam-matrix that is comprised of 3x4 IR-beams, generated from the fan of a bending magnet extracted over a range of 320x27mrad2 by employing a set of suitable mirrors, see Fig. 1 .
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSedlmair, J.; Illman, B.; Unger, M.; Hirschmugl, C. 2012. Diffraction-limited IR Microspectroscopy with IRENI. Microsc. Microanal. 18 (Suppl 2), 2012; pp. 840-841.
KeywordsChemical imaging, FTIR, synchrotron/poplar wood, microanalysis
- Individual- and scattered-tree influences on ultraviolet irradiance
- Data fusion of Landsat TM and IRS images in forest classification
- Arkansas, 2009 forest inventory and analysis factsheet
XML: View XML